2005

201 Applicability of the on-line monitoring method for PCBs disposal processes
Laser ionization time of flight mass spectrometry

Shinsaku Dobashi

Mitsubishi Heavy Industries

Yoshihiro Deguchi

Mitsubishi Heavy Industries

Masaharu Kira

Mitsubishi Heavy Industries

Ryuichiro Tanaka

Mitsubishi Heavy Industries

Yoshinori Izawa

Mitsubishi Heavy Industries

Takahiro Kubota

Mitsubishi Heavy Industries

Michikazu Hara

Tokyo Institute of Technology

Akihide Wada

Tokyo Institute of Technology

202 A Study on Technology Life Cycle Assessment(TLCA)
Proposal of Best Available System for Waste Management and Development of Software

Katsuya NAGATA

Waseda University, Ohkubo3-4-1, Shinjuku-ku, Tokyo

Makoto NOＨTOMI

Waseda Univ.

Hiroshi ONODA

Waseda Univ.

Mitsuhiro KATANO

Waseda Univ.

Syohgo KAZAMA

Waseda Univ.

Tadashi KANEKO

Waseda Univ.

Morihiro OSADA

NIPPON STEEL Co.,

203 Development of Eco-Efficiency Potential Assessment
A study on Utility of the industrial products

Katsuya NAGATA

Waseda Univ., 3-4-1, Okubo, Shinjuku Tokyo

Hiroshi ONODA

Waseda Univ.,

Tetsuya ONODA

Waseda Univ.,

Yusuke TAKAMATSU

Waseda Univ.,

Masahito AIZAWA

EMSI

204 Study on life style assessment applied the integrated index ‘‘ELP’’
Environmental load of heating and clothes and development of LSA software

Katsuya NAGATA

Waseda Univ., 4-1, Okubo 3-shome, Shinjuku-ku, Tokyo

Makoto NOＨTOMI

Waseda Univ.

Hiroshi ONODA

Waseda Univ.

Masakazu MORIBE

Waseda Univ.

Eisuke SHIKATA

Waseda Univ.

Shinichi KAGIYA

TOKYO GAS Co.,Ltd.

Kazunori MATSUMAE

TOKYO GAS Co.,Ltd.

205 A study on SSafety and Reassurance in Waste Management System
Development of a New Safety Analysis Method

Katsuya NAGATA

Waseda Univ., 3-4-1, Okubo, Shinjuku Tokyo

Makoto NOＨTOMI

Waseda University

Hiroshi ONODA

Waseda University

Motoshi MURAOKA

Waseda University

Yuji NAGAI

Waseda University

Kei TANAKA

Waseda University

Naotake ISHIZAKI

Waseda University

Takuya KIRIKAWA

Waseda University

206 An Approach Integrating Life Cycle Assessment and Costing Model for Eco-Industrial Product

Yoshiyuki IZU

Dept. of Mech. Eng., Mie Univ., 1577 Kurimamachiya-cho, Tsu, Mie 514-857

Seizo KATO

Mie Univ.

Sate SAMPATTAGUL

Mie Univ.

Naoki MARUYAMA

Mie Univ.

Akira NISHIMURA

Mie Univ.

Ryuma ITO

Mie Univ.

Yucho SADAMICHI

Mie Univ.,

Yukio KIMURA

Mie Factory, Fuji Electric Systems, Co., Ltd., 1-27 Fuji-cho, Yokkaichi, Mie 51-13

207 Gate to Gate Life Cycle Evaluation of Industrial products for Eco-Production Development

Yuki YAMAOKA

Dept. of Mech. Eng., Mie Univ., 1577 Kurimamachiya-cho, Tsu, Mie 514-858

Naoki MARUYAMA

Mie Univ.

Yucho SADAMICHI

Mie Univ.

Seizo KATO

Mie Univ.

Akira NISHIMURA

Mie Univ.

Yukio KIMURA

Mie Factory, Fuji Electric Systems, Co., Ltd., 1-27 Fuji-cho, Yokkaichi, Mie 51-13

Nobuhiro WATANABE

Mie Factory, Fuji Electric Systems, Co., Ltd., 1-27 Fuji-cho, Yokkaichi, Mie 51-13

208 Recycling Technique of FRP Using Mixed Acid
Evaluation of Mechanical Properties of Recycled Fiber Reinforced Plastic

Akihiro HORIDE

Shizuoka Institute of Science and Technology, 22-2 Toyosawa, Fukuroi, Shizuoka

209 Development of catalytic cracking process for converting waste plastics to aromatics.

Junya NISHINO

Ishikawajima-Harima Heavy Industries Co., Ltd. 1, shin-nakahara-cho, isogo-ku, yokohama

Masaaki ITOH

IHI

Hironobu FUJIYOSHI

IHI

Nobuhiko KUBOTA

IHI

Yoshio UEMICHI

Muroran Institute of Technology, 27-1, mizumoto-cho, muroran

210 The Progress to Feedstock Recycling in Large Scale Waste Plastic Liquefaction Plant
For the Construction of True Recycle Sosiety

Eiichi SUGIYAMA

Toshiba Corporation, 1-1 Shibaura 1-chome, Minato-ku, Tokyo

Nobuyuki SIRATORI

Japan Energy Corporarion, 3-17-35 Niizo-Minami Toda-shi, Saitama

Takanori KAWANISHI

Japan Energy Corporarion

Tetuo ABE

Rekiseikouyu Co., Ltd., 3-1 Heiwa-Cho, Niigata-shi, Niigata, Niigata

Keiji WAKAI

Sapporo Plastic Recycle Co., Ltd.(SPR), 45-47 Nakanuma-chou, Higashi-ku, Sapporo

211 Strength Properties of Wood Powder Molding Material Recycled from Wood Waste

Hiroshi IMANISHI

National Institute of Advanced Industrial Science and Technology, 2266-98 Anagahora, Shimoshidami, Moriyama-ku, Nagoya 463-856

Osamu YAMASHITA

Graduate School of Bioagricultural Sciences, Nagoya University

Tsunehisa MIKI

Kyoto Institue of Technology

Kozo KANAYAMA

National Institute of Advanced Industrial Science and Technology

212 A Study on Quantity Assesemnt Method of Disassembly Property
Disassembly Analysis of the Industrial Products and Development of Disassembly Surportting Software

Katsuya NAGATA

Waseda Univ., 3-4-1, Okubo, Shinjuku Tokyo

Makoto NOＨTOMI

WASEDA Univ.

Hiroshi ONODA

WASEDA Univ.

Takuya KIRIKAWA

WASEDA Univ.

Kenta TAKAHASHI

WASEDA Univ.

Hirofumi FUTAMATA

WASEDA Univ.

213 An Apprication of NGH-Technology to Bio-Gas Systems

Takayuki MARUMOTO

Mitsui Engineering & Shipbuilding, 4-6, Nishikasai 8-chome, Edogawaku, Tokyo

Ryuichi DAIKE

Mitsui Engineering & Shipbuilding, 4-6, Nishikasai 8-chome, Edogawaku, Tokyo

Mazumi ITAYA

Mitsui Engineering & Shipbuilding, 4-6, Nishikasai 8-chome, Edogawaku, Tokyo

Hirotoshi SAKAGAMI

Kitami Institute of Technology, 165 Koen-cho, Kitami, Hokkaido

Hitoshi SHOJI

Kitami Institute of Technology, 165 Koen-cho, Kitami, Hokkaido

Nobuo TAKAHASHI

Kitami Institute of Technology, 165 Koen-cho, Kitami, Hokkaido

214 Low Excess Air　Ratio Operation Report of Stoker Type Incinerator using Exhaust Gas Recirculation System

Tadashi KATAHATA

Kawasaki Heavy Industries,Ltd. 3-1-1, Higashikawasaki-cho, Chuo-ku, Kobe, 65-867

Sadafumi KATO

Kawasaki Heavy Industries,Ltd.

Narihiro YO

Kawasaki Heavy Industries,Ltd.

Atsushi HASHIMOTO

Kawasaki Heavy Industries,Ltd.

215 Blend melting test of digged final disposal waste with high purity oxygen blowing shaft type incinerator

Syuichi MORIOKA

Kawasaki Heavy Industries,Ltd. 3-1-1, Higashikawasaki-cho, Chuo-ku, Kobe, 65-867

Atsushi NAGATA

Kawasaki Heavy Industries,Ltd.

Hiroya TAGASHIRA

Kawasaki Heavy Industries,Ltd.

Tadashi KATAHATA

Kawasaki Heavy Industries,Ltd.

Atsushi HASHIMOTO

Kawasaki Heavy Industries,Ltd.

216 Study of Utilization of Biomass Resources by Pyrolysis Gasification Process

Tsuyoshi NOMA

Toshiba Corporation, 1-1-1, Shibaura, Minatoku, Tokyo, Japan

Takayuki ISHIGE

TOSHIBA Co.,

Tadashi IMAI

TOSHIBA Co.,

Kiyoshi IMAI

TOSHIBA Co.,

Takashi AMEMIYA

TOSHIBA Co.,

Hidetoshi IBE

TOSHIBA Co.,

217 Gasification Characteristics of Biomass

Takahiro MURAKAMI

Ishikawajima-Harima Heavy Industries Co., Ltd., Isogo-ku, Yokohama 235-851, Japan

Toshiyuki SUDA

IHI

Guangen Xu

IHI

Shigeru Kusama

IHI

Toshiro Fujimori

IHI

Yoshiaki MATSUZAWA

IHI

218 Scenario Making for Effective Utilization System of Woody Biomass in Local Community At Shinsiro and Horai Areas in Aichi Prefecture
At Shinshiro and Horai area in Aichi Prefecture

Ichiro Naruse

Toyohashi University of Technology, Tempaku-cho, Toyohashi 441-858

Tsuyoshi Takuwa

Toyohashi University of Technology

Takanori Shinba

Toyohashi University of Technology

Yoshio Kawai

Shishiro city hall

Shuhei Tomimura

Tomimura Environmental office, Okamoto, Setagaya-ku, Tokyo, 157-76

219 Demonstration Study on Gasification and Melting System for Waste Plastics

Tadashi ITO

KOBELCO ECO-SOLUTIONS Co.,LTD. 1-4-78 Wakinohama-cho, Chuo-ku, Kobe, HYOUGO

Kazuaki SAKATA

KOBELCO ECO-SOLUTIONS Co.,LTD. 1-4-78 Wakinohama-cho, Chuo-ku, Kobe, HYOUGO

220 An Experimental Attempt at Reducing Unburnt Particle Emission in the Recycled PET-Resin Powder Combustion

Ryuji YAMAKITA

Nagoya Institute of Technology

Yuki KATO

Nagoya Institute of Technology

Yojiro ISHINO

Nagoya Institute of Technology、 Gokiso-cho, Showa-ku, Showa-ku, Nagoya 466-8555

Norio OHIWA

Nagoya Institute of Technology

221 Burning Properties of Wasted PET-Resin Powder Using High-Temperature and Oxidizing Atmosphere Stabilized by the Annular Flame

Ryuji YAMAKITA

Nagoya Institute of Technology

Keisuke TERAMOTO

Nagoya Institute of Technology

Yojiro ISHINO

Nagoya Institute of Technology、 Gokiso-cho, Showa-ku, Showa-ku, Nagoya 466-8555

Norio OHIWA

Nagoya Institute of Technology

222 Development of kiln type pyrolysis gasification system

Hideki NAKAGOME

Department of Urvan Environmental Sytem, Chiba University, 1-33, Yayoi, Inage-ku, Chiba 263-8522

Kiyoshi IMAI

Industrial and Power System & Services Compani, TOSHIBA CORP., 1-1, Shibaura 1-Chome, Minato-ku, Tokyo 15-81

Mina SAKANO

Toshiba Corporation

Tsuyoshi NOMA

Toshiba Corporation

Hidetoshi IBE

Toshiba Corporation

223 Plasma Melting Technology of PCB-Contaminated Wastes

Mitsuya MURATA

Nippon Steel Corporation, 46-59, Nakabaru, Tobata-ku, Kitakyushu 84-855

Morihiro OSADA

Nippon Steel Corporation

Shigeyoshi TAGASHIRA

Kobelco Eco-Solutions, Co. Ltd.,-78, 1-Chome, Wakinohama-cho, Chuo-ku, Kobe 651-72

Masamitsu TAKAHASHI

Kobelco Eco-Solutions, Co. Ltd.,

224 Hydrogen Production from Catalytic Gasification-Reforming of Waste Wood

Katsuya Kawamoto

National Institute of Environmental Studies, 16-2 Onogawa, Tsukuba, Ibaraki, Japan

Hidetoshi Kuramochi

National Institute of Environmental Studies, 16-2 Onogawa, Tsukuba, Ibaraki, Japan

Wu Wei

National Institute of Environmental Studies, 16-2 Onogawa, Tsukuba, Ibaraki, Japan

225 Performance of catalytic filter bag filter

Makoto YAMAMOTO　

Mitsui Engineering & Shipping Co., Ltd., Yawatakaigan-Dori 1, Ichihara-City, Chiba Pref.

Tomio SUGIMOTO

MITSUI ENGINEERING & SHIPBUILDING CO.,LTD

Mazumi ITAYA

MITSUI ENGINEERING & SHIPBUILDING CO.,LTD

Taiichi OKUMURA

Mitsui Engineering & Shipbuilding Co., Ltd., Nishikasai 8-4-6, Edogawa-ku, Tokyo

Kazunori TAKEUCHI

Mitsui Engineering & Shipbuilding Co., Ltd., Nishikasai 8-4-6, Edogawa-ku, Tokyo

227 Catalytic Oxidation of Hydrocarbon System Refrigerant Isobutane (2nd Report)

Minoru SATO

Mitsubishi Electric Corporation, 8-2-1, Tsukaguchi-Honmachi, Amagasaki, Hyogo

Hiroaki SHIGEOKA

Mitsubishi Electric Corporation

Yoshio NISHIMOTO

Mitsubishi Electric Corporation

229 Extension of Operating Temperature Range of the High-Temperature Corrosion Monitoring Sensor for Boiler Tubes in Waste Incineration Plants

Yuji KAMEI

Kawasaki Heavy Industries, Ltd, 1-1, Kawasaki-cho, Akashi, Hyogo

Akiyoshi MIZUTA

Kawasaki Heavy Industries, Ltd, 1-1, Kawasaki-cho, Akashi, Hyogo

Ken-ichi FUJII

Kawasaki Heavy Industries, Ltd, 3-1-1, Higashikawasaki-cho, Chuo-ku, Kobe

Hiroshi FUJIMOTO

Kawasaki Heavy Industries, Ltd, 3-1-1, Higashikawasaki-cho, Chuo-ku, Kobe

230 The Development of Transport System of Thermal Energy by Direct Contact Latent TES Technology
The Transportation Experiment of TES Cassette

Kazuo TAKAHASHI

Kobe Steel Ltd. Takatsuka-dai, Nisih-ku, Kobe

Yasuo HIGASHI

Kobe Steel Ltd.

Toshiya MIYAKE

Kobe Steel Ltd.

Shigeyoshi TAGASHIRA

Kobelco Eco-Solutions Co.Ltd., Wakinohama-Cho, Chuo-ku, Kobe

231 Characteristic of sulfur-solidified concrete

Kenji ITO

Nippon Oil Corporation, 1-8 Motowanishi-cho, Muroran, Hokkaido

Yoshihisa TAKEI

Nippon Oil Corporation

Hideyuki HORII

Nippon Oil Corporation

Yoshitaka OHTA

Nippon Oil Corporation

Yasuo NAKATSUKA

Nippon Petroleum Refining Co., 3-39 Koyasudoori, Yokohama, Kanagawa

Toshio MORIHIRO

Nippon Petroleum Refining Co., Ltd.

232 Incinerated Ash Treatment Result By Stoker Furnace + Surface Melting Furnace
Verfication for the System with 2-Stage(Normal and Catalytic) Bag Filter

Tomokazu SUYAMA

Sanki Engineering Co., Ltd., 1742-7, Shimotsuruma, Yamato-shi, Kanagawa

Haruo MIYATA

SANKI　ENGINEERING　CO., LTD.

Makoto FURUHAYASHI

SANKI　ENGINEERING　CO., LTD.

233 The Quality of Concrete when Waste Melting Incinerator Slag is Used as Pulverized Aggregate

Noboru FUJIMOTO

Fukuoka Univ. of Education, Akama bunkyomachi 1-1, Munakata, Fukuoka

Masao TOMARI

Tomari Professional Engineering Office, Tsuda-shinnmachi 1-13-26, Kokura-minami-ku, Kitakyusyu, Fukuoka

Study　of　energy　utilization　of　biomass　resources
Energy utilization by biomass gasification

Noma Tsuyoshi

TOSHIBA

Ibe Hidetoshi

TOSHIBA

Ishige Takayuki

TOSHIBA

Yoshikawa Jun

TOSHIBA

Imai Tadashi

TOSHIBA

Karato Shigeki

TOSHIBA