JSME International Journal

JSME International Journal Series A
Contents

Papers

［Material Evaluation］

●Nondestructive Evaluation of Sintered Iron Using Dynamic Young's Modulus Testing(1): Norimitsu HIROSE, Shin-ichi TANAKA, Junichi ASAMI and Tohru KOHNO
●Use of Electromagnetic Acoustic Resonance Method to Detect Micro-Voids Via Evaluation of Ultrasonic Wave Attenuation Coefficient of SUS304 Steel Fabricated by Hot Isostatic Press(8): Hidetaka NISHIDA, Hiroshi YAMAGUCHI and Masashi YOSHIDA
●Determination of Stress-Acoustic Coefficients of Rayleigh Wave by Use of Laser Doppler Velocimetry(17): Lingfeng HE and Shoichi KOBAYASHI
●New Approaches to Nondestructive Evaluation of a Filament-Wound Composite Motor Case Using Circumferential Wave(23): Sung-Jin SONG, Ji-Ung CHOE and Dong-Ho BAE
●Green's Function Approach to Solution of Transient Temperature for Thermal Stresses of Functionally Graded Material(31): Kui-Seob KIM and Naotake NODA
●Temperature/Stress Distributions in a Stress-Relief-Type Plate of Functionally Graded Materials under Thermal Shock(37): Hideo AWAJI, Hiromitsu TAKENAKA, Sawao HONDA and Tadahiro NISHIKAWA
●Lower-bound and Upper-bound Rigid-plastic Constitutive Models for Porous Materials: Comparison and Examination(45): Yajun YIN, Mingde XUE and Shouwen YU

［Deformation］

●Fundamental Deformation and Recovery Behaviors of Ni-Ti-Nb Shape Memory Alloy(57): Masaki KUSAGAWA, Toshiya NAKAMURA and Yasuhide ASADA
●New Development of the Multiple Strata Plasticity Model(64): Yoichi OBATAYA, Takamoto ITOH and Takaya KATO
●An Incremental Variational Principle Minimizing Experimental Measurement Errors and Its Application to an Intelligent Hybrid Experimental-Numerical Method (Case of Nonlinear Elastic-Plastic Deformation Field)(71): Toshihisa NISHIOKA, Hiroki IKEGITA, Kazutaka TAMAI and Naoki KOBAYASHI
●Description of Temperature Dependence and Creep Deformation of 60Sn-40Pb Solder Alloys(82): Ken-ichi OHGUCHI and Katsuhiko SASAKI
●Analytical Approach to Large Deformation Problems of Frame Structures (In Case of a Square Frame with Rigid Joints)(89): Atsumi OHTSUKI and Fernand ELLYIN
●Consideration of Deformation of TiN Thin Films with Preferred Orientation Prepared by Ion-Beam-Assisted Deposition(94): Toshiyuki HAYASHI, Akihito MATSUMURO, Tomohiko WATANABE, Toshihiko MORI, Yutaka TAKAHASHI and Katsumi YAMAGUCHI

［Damage & Fracture］

●Tension-Compression Asymmetry of Creep and Unilateral Creep Damage in Aluminum for Isothermal and Nonisothermal Processes(100): Alexander ZOLOCHEVSKY and Yoichi OBATAYA
●Application of a Nonlinear Creep-Fatigue Damage Model to 2 1/4Cr-1Mo Steel(109): Kasivitamnuay JIRAPONG, Toshiya NAKAMURA and Yasuhide ASADA
●A Modified Wheeler Model to Improve Predictions of Crack Growth Following a Single Overload(117): Pey-Shiuan SONG, Bor-Chiou SHEU and Li CHANG
●Evaluation of Fracture Characteristics of TiN Ceramics Film with Scratch Testing (Application of Fractal Dimension of AE Peak Amplitude Distribution)(123): Noboru SHINKE, Akira YONEKURA, Masanori TAKUMA, Hideaki YOSHIDA and Seiki KAWAI
●Sensitivity Analysis of Failure Probability on PTS Benchmark Problems of Pressure Vessel Using a Probabilistic Fracture Mechanics Analysis Code(130): Yinsheng LI, Daisuke KATO and Katsuyuki SHIBATA
●Factors Affecting Non-Propagation of Fatigue Crack in a Low-Carbon Steel (Effect of Oxide-Induced Crack Closure)(138): Terutoshi YAKUSHIJI, Masaharu KAGE and Hironobu NISITANI

［Computational Mechanics］

●Parallelization of Finite Element Analysis Using Broadcast on Workstation Cluster(144): Akira MATSUDA, Takashi KATO, Yoshio MIYAKAWA, Tooru KAWABE and Akinori NAGAOKA
●Study of a Combined FEM-MD Method for Silicon(152): Satoshi IZUMI, Takashi KAWAKAMI and Shinsuke SAKAI
●Numerical Simulation of the Loading Tests of Laminated Rubber Bearings(160): Akihiro MATSUDA, Yasuki OHTORI, Shuichi YABANA and Kazuta HIRATA

［Optimal Design］

●Design Methodology of Flexible Structures by Spring-and-Segment Model(167): Osamu KUWAZURU, Nobuhiro YOSHIKAWA and Shigeru NAKAGIRI
●Global Optimization Method to Locate Multiple Local Optima with Response Surface Approximation Methodology(175): Qinzhong SHI, Ichiro HAGIWARA and Futoshi TAKASHIMA
●Fit Effect of Motorcycle Helmet ―A Finite Element Modeling(185): Li-Tung CHANG, Chih-Han CHANG and Guan-Liang CHANG

E-mail:journal@jsme.or.jp

All Rights Reserved, Copyright (C) 2001, The Japan Society of Mechanical Engineers.