JSME International Journal

JSME International Journal Series B
Contents

Papers

［Unsteady Flow and Flow Visualization］

●Study on the Characteristics of an Oscillating Flat Plate in Iron-Nitride Magnetic Fluid(1): Tadamasa OYAMA, Kazuyuki UENO, Kazunari KATAGIRI, Shinichi KAMIYAMA and Isao NAKATANI
●Stability of a Soft Plate in Channel Flow (Aerodynamic Aspects of Palatal Flutter)(8): Yoshimichi TANIDA
●Oscillation of a Magnetically Levitated Diamagnetic Droplet Under a Vertical Magnetic Disturbance(14): Jianqiang MAI, Takuyo OKADA, Shuzo OSHIMA and Ryuichiro YAMANE
●Active Control of Boundary-Layer Transition Using a Thin Actuator(24): Yu FUKUNISHI and Isao EBINA
●Visualization and PTV Study of Natural Convection in Particle Suspensions (Simultaneous Measurements of Velocity, Temperature and Interface between Particle-Free Fluid and Suspension)(30): Fumihiko MIKAMI, Bin CHEN and Nobuhide NISHIKAWA

［Numerical Simulation of Fluid Flow］

●Three-Dimensional Simulation of MHD Flow with Turbulence (Reduction of Turbulence to Two-Dimensional One in Downstream)(38): Kazuyuki UENO, Kensuke SAITO and Shinichi KAMIYAMA
●The Lattice BGK Model for the Poisson Equation(45): Miki HIRABAYASHI, Yu CHEN and Hirotada OHASHI
●Lattice Boltzmann Simulation of Natural Convection in a Square Cavity(53): Junya ONISHI, Yu CHEN and Hirotada OHASHI
●Improvement of a Low-Reynolds-Number Second Moment Closure and Its Application to Rotating Turbulent Channel Flows(63): Jong Keun SHIN and Young Don CHOI
●Direct Numerical Simulations of Subsonic Plane Poiseuille Flows Undergoing Transition(72): AL Moez YAHYAOUI, Hiroshi MAEKAWA and Kiyoshi YAMAMOTO

［Heat Transfer］

●Study of Critical Heat Flux Mechanism in Flow Boiling Using Bubble Crowding Model (Application to CHF in Short Tube and in Tube with Twisted Tape under Non-Uniform Heating Conditions)(81): Hidetaka KINOSHITA, Hideki NARIAI and Fujio INASAKA
●Turbulent Transition Mechanisms of Natural Convection over Upward-Facing Horizontal Plates(90): Kenzo KITAMURA, Xiao-An CHEN and Fumiyoshi KIMURA
●Enhancement of Film Cooling Performance Using a Shaped Film Cooling Hole with Compound Angle Injection(99): Hyung Hee CHO, Dong Ho RHEE and Byung Gi KIM
●Evaluation of Effective Temperature Scale under Urban Heat Island Formation(111): Takeo S. SAITOH and Noboru YAMADA

［Combustion］

●Effect of Inert Gas on Turbulent Burning Velocities(119): Hiroyuki KIDO, Jun HASHIMOTO, Dilmurat BARAT, Masashi NISHIGAKI and Hideki OKAMOTO
●Interaction Effects on Combustion of Alcohol Droplet Pairs(126): Keiichi OKAI, Yutaka ONO, Osamu MORIUE, Seiji SHIBA, Mikiya ARAKI, Hiroshi NOMURA, Seiichi SHIGA, Mitsuhiro TSUE and Michikata KONO
●Burning Used Automotive Tires for Activated Carbon(133): Byung-chul CHOI, Wook CHOI and Myung-Taeck LIM

［Heat Engine］

●Performance of Stirling Engines (Arranging Method of Experimental Results and Performance Prediction)(140): Shoichi IWAMOTO, Koichi HIRATA and Fujio TODA
●Multidimensional Simulation of NO and Soot from D.I. Diesel Engines with Fuel Injection Rate Shaping(148): Koji YAMANE and Yuzuru SHIMAMOTO
●Piezo-fluidic Gaseous Fuel MPI System for Natural Gas Fuelled IC Engines(158): Rui CHEN
●Combination of Methods for Characterization Diesel Engine Exhaust Particulate Emissions(166): Moh'd ABU-QUDAIS, Andreas MATSON and David KITTELSON

E-mail:journal@jsme.or.jp

All Rights Reserved, Copyright (C) 2001, The Japan Society of Mechanical Engineers.