JSME International Journal Series C
Contents
- Volume 44, No.2 June 2001
- Series C: Mechanical Systems,Machine Elements and Manufacturing
Contents
Papers
［Vibration and Acoustics］
- ●Vibration Analysis of a Multi-Stage Gear System Including Drive Mechanism Elements (Proposal of Three-Dimentional Vibration Model and Eigenvalue Analysis of Helical Gear System)(307)
- Eiichirou TANAKA, Naoyuki TANAKA and Kousaku OHNO
- ●Robust Fuzzy Control of a Vibrating Thin Plate(315)
- Chun-Liang LIN and Pei-Sen HAO
- ●Suppressing the Blade Vibrations of a Turbine-generator Due to Power Disturbances by Optimally Operating a BR Bank(327)
- Wen-Chang TSAI
- ●An Experimental Approach for Structural Dynamic Modification of Fixture in Vibration Test Control(334)
- Jun Yeop KIM, Weui Bong JEONG, Si Bok LEE and Byung Hoon LEE
- ●Active Noise Reduction in Ducts of Actuating Dynamics Using Two Periodic Control Signals(341)
- Jong-Yih LIN and Jin-Qi LIAO
- ●Analysis of the Vibration Damping of Bonded Beams with a Single-Lap-Joint and Partial Dampers(350)
- Nak-Sam CHOI and Jeong-Il PARK
［Dynamics, Measurement and Control］
- ●In-Process Error Compensation for Tooth Form Grinding Works (Robust Error Estimation Algorithm against the Measuring Error and Experimental Result of the In-Process Grinding Error Compensation)(360)
- Takashi HARADA, Kazuhiro KOTANI and Takashi MIYOSHI
- ●Analysis on the Fundamental Properties of Active Magnetic Bearing Control Systems by a Transfer Function Approach(367)
- Takeshi MIZUNO
- ●A Control Algorithm to Mixed-Quantized Discrete Linear Optimal Control Systems(374)
- Tsunehiro MUNAKATA, Akihiro HASEGAWA, Satoshi INOUE and Kahar SAMSAK
- ●Finite Element Modeling of the Muscle Effects on Kinematic Responses of Head-Neck Complex in Frontal Impact at High Speed(379)
- Adam WITTEK, Janusz KAJZER, Eberhard HAUG and Koshiro ONO
- ●A Parallel Numerical Method for Bio-Flow Analysis(389)
- Bayya V. Rathish KUMAR, Takami YAMAGUCHI, Hao LIU and Ryutaro HIMENO
- ●Modeling and Control for an Asymmetric Hydraulic Active Suspension System(397)
- Wanil KIM and Sangchul WON
- ●H∞ Direct Yaw-Moment Control with Brakes for Robust Performance and Stability of Vehicles(404)
- Jong Hyeon PARK
- ●Output Regulation for MIMO Linear Systems Using Integral Variable Structure Control(414)
- Jeang-Lin CHANG
- ●Effect of an Out-of-Sphericity Error on the Radial Stiffness of an Air Dynamic Bearing(421)
- Woo Chun CHOI, Yong Ho SHIN and Chung Whan CHOI
- ●New Non-Lyapunov Approach to Robust Eigenvalue-Clustering Analysis(427)
- Shinn-Horng CHEN, Jyh-Horng CHOU, Wen-Long YAO and Tsow-Chang FU
［Robotics and Mechatronics］
- ●Dynamic Detection of a License Plate Using Neural Network(431)
- Naoki SUGANUMA, In Soo KWEON, Yue BAO and Naofumi FUJIWARA
- ●Control of Flexible Manipulators Via Serial-to-Parallel Transformation(437)
- Shang-Teh WU
［Machine Elements and Tribology］
- ●A Tooth Surface Finishing Method with a New Tool of a Vitrified Cubic Boron Nitride Wheel for Involute Internal Spline(445)
- Sadao MIZUNO, Tetuya MORITA and Yasutsune ARIURA
- ●Relationships of Friction, Pull-off Forces and Nanometer-scale Surface Geometry(453)
- Yasuhisa ANDO, Toshiyuki TANAKA, Jiro INO and Kazuo KAKUTA
- ●Simulation for Response Analysis of Flying Head Slider Movement Subjected to Random Air Lift(462)
- Jun TOYOTANI and Teruo NAKAMURA
- ●Numerical Analysis of Stiffness of Self-Acting Air Bearings of Various Curvatures(470)
- Woo Chun CHOI, Yong Ho SHIN and Jung Hwan CHOI
- ●Finite Element Approach to Model and Analyze Piezoelectric Actuators(476)
- Alan R. BARNETT, Saravanan M. PEELAMEDU, Rao V. DUKKIPATI and Nagi G. NAGANATHAN
［Design, Systems and Manufacturing］
- ●Flexible and Incremental Bulging of Sheet Metal Using High-Speed Water Jet(486)
- Hideo ISEKI
- ●Analysis on Characteristics of a C-Shaped Constant-Force Spring with a Guide(494)
- Atsumi OHTSUKI, Shigemichi OHSHIMA and Daisuke ITOH
- ●Hourglass Worm Gearing with Worm Teeth Generated by High-Speed Screw Cutting Method (Manufacturing of High-Speed Hourglass Worm Screw Cutting Machine and Performance Test Results of the Worm Gear Generated by this New Machine)(500)
- Akiyo HORIUCHI and Minoru MAKI
- ●A Comparison of Safety Culture Associated with Three Engineered Systems in Japan and the United States(506)
- Akira TOKUHIRO
- ●Method for Face-Emotion Retrieval Using A Cartoon Emotional Expression Approach(515)
- Vlaho KOSTOV, Hideyoshi YANAGISAWA, Martin JOHANSSON and Shuichi FUKUDA
- ●Automatic Recognition of Turning Features Using 2-D Drawing Files(527)
- Saad M.A. SULIMAN and Khalil A. AWAN
- ●New Optimization Strategy for Chemical Mechanical Polishing Process(534)
- Gou-Jen WANG, Jau-Liang CHEN and Ju-Yi HWANG
- ●Experimental Investigation of Resistance Spot Welding for Sheet Metals Used in Automotive Industry(544)
- Min Jou
- ●Preisach Modeling of Hysteresis for Piezoceramic Actuator System(553)
- Yunhe YU, Zenngehu XIAO, Nagi NAGANATHAN and Rao V. DUKKIPATI
- ●A Study on Development of a New Algorithm for Predicting the Process Variables in GMA Welding Processes(561)
- Ill-Soo KIM, Chang-Eun PARK, Yong Hoon CHA, Young-Jae JEONG, In Kwon KIM, Jae Yoe KIM and Joon-Sik SON
- ●The Detection of Lanes and Obstacles in Real Time Using Optimal Moving Window(567)
- Sung Yug CHOI, Jang Myung LEE, Chung Kun SONG and Hyek Hwan CHOI
E-mail:journal@jsme.or.jp
All Rights Reserved, Copyright (C) 2001, The Japan Society of Mechanical Engineers.