Volume 45, No.1 January 2002

Series A: Solid Mechanics and Material Engineering

 

Contents

Special Issue on Creep and Fatigue at Elevated Temperatures

●Foreword

Akito NITTA

●Creep Behavior of Ir-Nb and Ir-Zr Refractory Superalloys

Yoko YAMABE-MITARAI, Shizuo NAKAZAWA and Hiroshi HARADA

●Creep Behavior of Ir-Nb-Ni Two-phase Refractory Superalloy

Yuefeng GU, Yoko YAMABE-MITARAI, Shizuo NAKAZAWA and Hiroshi HARADA

●Creep Behavior of 8Cr2WVTa Martensitic Steel Designed for Fusion DEMO Reactor (An Assessment on Helium Embrittlement Resistance)

Norikazu YAMAMOTO, Yoshiharu MURASE, Johsei NAGAKAWA and Kiyoyuki SHIBA

●Creep Behavior of Orthorhombic Ti₂AlNb Based Intermetallic Alloys

Feng TANG, Shizuo NAKAZAWA and Masuo HAGIWARA

●Effects of W and Co on the Microstructure and Creep Strength of the Precipitation Strengthened 15Cr Ferritic Steels

Yoshiaki TODA, Kazuhiro SEKI, Kazuhiro KIMURA and Fujio ABE

●Influence of Pre-Aging on Creep Rupture Strength of Tungsten Alloyed 9%Cr Ferritic Steel and Creep Damage Evaluation by Electrochemical Method

Shin-ichi KOMAZAKI, Shigeo KISHI, Tetsuo SHOJI, Tetsuo KUMAZAWA, Kojiro HIGUCHI and Koshi SUZUKI

●Nondestructive Evaluation of Creep Damage Using Leaky Surface Acoustic Wave Technique

Yoshikazu YOKONO, Yoshihiro NAGANO, Kazuhiro MUKAI and Takuichi IMANAKA

●High Temperature Low Cycle Fatigue of 2 1/4Cr1Mo Steels: Role of Microstructure and Effect of Environment

Jean-Bernard VOGT, Jose´ LEON SOSA and Sylvie ARGILLIER

●Study on Creep-Fatigue Life of Irradiated Austenitic Stainless Steel

Ikuo IOKA, Yukio MIWA, Hirokazu TSUJI, Minoru YONEKAWA, Fumiki TAKADA and Taiji HOSHIYA

●Thermal Fatigue in Thermal Barrier Coating

Yichun ZHOU and Toshiyuki HASHIDA

●On Time-dependent Crack Growth Parameters in Plasticity and Creep Fields

Kwang Soo KIM and Chul HAN

●Evaluation of Creep Damage due to Void Growth under Triaxial Stress States in the Design of Steam Turbine Components

Andreas WICHTMANN

●Shear Correction Factors in Creep-Damage Analysis of Beams, Plates and Shells

Holm ALTENBACH and Konstantin NAUMENKO

●Finite Element Creep Continuum Damage Mechanics Analysis of Pressurised Pipe Bends with Ovality

Thomas H. HYDE, Anas YAGHI, Adib A. BECKER and Peter G. EARL

●The Use of CDM Analysis Techniques in High Temperature Creep Failure of Welded Structures

David R. HAYHURST, Man Tak WONG and Farid Vakili-TAHAMI

●Advances in the Use of Stress Relaxation Data for Design and Life Assessment in Combustion Turbines

David A. WOODFORD

●Development of a Filler Metal for Weldments of a Ni-Cr-W Superalloy with High Creep Strength

Yuji KURATA, Teiichiro SAITO, Hirokazu TSUJI, Tamao TAKATSU, Masami SHINDO and Hajime NAKAJIMA

●Development of 18Cr-9Ni-W-Nb-V-N Austenitic Stainless Steel Tube for Thermal Power Boilers

Tetsuo ISHITSUKA and Hiroyuki MIMURA

---

---

E-mail:journal@jsme.or.jp

All Rights Reserved, Copyright (C) 2002, The Japan Society of Mechanical Engineers.