Volume 45, No.1 March 2002

Series C: Mechanical Systems,Machine Elements and Manufacturing

 

Contents

Special Issue on Advances in Dynamics and Design of Continuous Systems

●Foreword

Yoshihiro NARITA

●Three-Dimensional Vibration Analysis of Paraboloidal Shells

Arthur W. LEISSA and Jae-Hoon KANG

●Micro-Control Actions of Segmented Actuator Patches Laminated on Deep Paraboloidal Shells

Horn-Sen TZOU, Jianghong DING and Ichiro HAGIWARA

●Dynamic Characteristics of Cylindrical Composite Panels with Co-cured and Constrained Viscoelastic Layers

In LEE, Il-Kwon OH, Won-Ho SHIN, Ki-Dae CHO and Kyo-Nam KOO

●Identification of Elastic Parameters for Laminated Circular Cylindrical Shells (Comparison of Numerical and Experimental Results)

Kenji HOSOKAWA and Kin'ya MATSUMOTO

●A Study on Refined Analytical Method for Free Vibration Analysis of Laminated Composite Cylindrical Shells Using Equivalent Curvatures

Tetsuya NARISAWA

●Analytical Study of Vertical and Torsional Free Vibration of Cable Supported Bridge Decks

Daniel J. GORMAN

●Influence of Initial Tension on Out-Plane Vibrations of a Rotating Circular Plate

Katsuyoshi SUZUKI, Hiroyuki YOSHIDA and Xuelan ZHENG

●Noncontact Vibration Control of a Magnetic Levitated Rectangular Thin Steel Plate

Yasuo OSHINOYA and Takayuki OBATA

●Vibration and Control of Axially Moving Crawler Used for Tracked Vehicles

Koetsu TAKANO, Hiroyuki FUJIWARA, Osami MATSUSHITA, Keiji WATANABE, Yoichi KANEMITSU and Hiroki OKUBO

●Reduced-Order Nonlinear Modal Equations of Plates Based on the Finite Element Method

Akira HARADA, Yukinori KOBAYASHI and Gen YAMADA

●Optimization Approach for Reducing Sound Power from a Vibrating Plate by Its Curvature Design

Shou KANEDA, Qiang YU, Masaki SHIRATORI and Keiichi MOTOYAMA

●Simultaneous Optimal Design of Stiffness and Damping of a Flexible Structure Reinforced by FRP Sheets

Mitsuaki NAKANISHI, Yukinori KOBAYASHI and Gen YAMADA

●The Study of Analytical Models for Vibration of Cross-ply Laminated Thick Plates

Yoshiki OHTA and Toshihiro IKUNO

●Vibration Analysis of Shear-deformable Circular and Elliptical Laminated Composite Plates

Yoshihiro NARITA, Kenichi FUKUSHI and Xilu ZHAO

●A Bispectrum Feature Extraction Enhanced Structure Damage Detection Approach

Jin CHEN, Ichiro HAGIWARA, Xiang SU and Qinzhong SHI

●Simultaneous Structure-Control Optimization of a Steering Wheel for Vibration Suppression

Ye ZHU, Jinhao QIU and Junji TANI

●The Study of Nonlinear Vibration Analysis of Rotor System Using Component Mode Synthesis Method (Analysis Using the Harmonic Balance Method)

Takuzo IWATSUBO, Kenichi SHIMBO and Shozo KAWAMURA

●Adaptive Unbalanced Vibration Control of Magnetic Bearing Systems with Rotational Synchronizing and Asynchronizing Harmonic Disturbance

Zi-he LIU, Kenzo NONAMI and Yuichi ARIGA

●Output Feedback Sliding Mode Control for Bending and Torsional Vibration Control of 6-story Flexible Structure

Kosuke IWAMOTO, Yuji KOIKE, Kenzo NONAMI, Koji TANIDA and Itaru IWASAKI

●Curving Analysis of Modified Designs of Passenger Railway Vehicle Trucks

Rao V. DUKKIPATI, Srinivasan NARAYANASWAMY and Mohammad O.M. OSMAN

●Lateral Stability Simulation of a Rail Truck on Roller Rig

Rao V. DUKKIPATI

●Lateral Stability and Steady State Curving Performance of Unconventional Rail Trucks

Rao V. DUKKIPATI and Srinivasan NARAYANASWAMY

●Robust Model Following Control for Uncertain Systems with Input Nonlinearities

Kuo-Ming CHANG

●Robust Nonlinear H₂/H_∞ Control for a Parallel Inverted Pendulum with Dry Friction

Seong Ik HAN, Jong Shik KIM and Jae Weon CHOI

●A Constrained Multibody System Dynamics Avoiding Kinematic Singularities

Chih-Fang HUANG, Chang-Dau YAN, Shyr-Long JENG and Wei-Hua CHEING

●A Global Sliding-Mode Control Scheme with Adjustable Robustness for A Linear Variable Reluctance Motor

Jin-Yuan LIN, Yu-Sheng LU and Jian-Shiang CHEN

●Optimal Tracking Design for Sampled-Data Systems with Input Time Delay under State and Control Constraints

Yu-Pin CHANG, Jason Sheng-Hong TSAI and Leang-San SHIEH

●A Study on Stability Characteristics of Actively Controlled Hydrodynamic Journal Bearings

Byoung-Hoo RHO and Kyung-Woong KIM

●Design of the Electronic Brake Pressure Modulator Using a Direct Adaptive Fuzzy Controller in Commercial Vehicles for the Safety of Braking in Fail

Hunmo KIM

●Tolerance Allocation of Sheet Metal Assembly Using a Finite Element Model

BoonWai SHIU, Bing LI, XiangYang FU and Yang LIU

●Casting Manipulation (Experiments of Swing and Gripper Throwing Control)

Hitoshi ARISUMI, Kazuhito YOKOI, Tetsuo KOTOKU and Kiyoshi KOMORIYA

●Autonomous Behavior-Mode Switching in a Two-Mobile Robotic System (S-Temperature Based On-line Learning)

Tsutomu SAWADA, Sumiaki ICHIKAWA and Fumio HARA

●Neuro-Fuzzy Dynamic Obstacle Avoidance for Autonomous Robot Manipulators

Jean Bosco MBEDE, Pierre ELE and Huang XINHAN

●Automatic Contour Extraction of Facial Organs for Frontal Facial Images with Various Facial Expressions

Hiroshi KOBAYASHI, Seiji SUZUKI, Hisanori TAKAHASHI, Akira TANGE and Kohki KIKUCHI

●A Multiple RCC Device for Polygonal Peg Insertion

Chi-Cheng CHENG and Gin-Shan CHEN

●3-Dimensional Elastohydrodynamic Lubrication Analysis on the Cam-Roller Contact with Consideration of Roller Profiling

Young-Pil KOO, Yong-Joo CHO and Deug-Woo LEE

●Dynamic Routing in Automated Guided Vehicle Systems

Jae Kook LIM, Kap Hwan KIM, Ki Young KIM, Teruo TAKAHASHI and Kazuho YOSHIMOTO

●A Study on the Collaborative Design Using Supervisor System

Tomoyuki MIYASHITA and Hiroshi YAMAKAWA

●Feature Representation and Manipulation Aid for a 3D Virtual Object by a Finger- Mounted Tactile Display

Yasushi IKEI, Yukishige MOURI and Shuichi FUKUDA

●System Matrices Identification of Structure: An Insensitive Procedure for Data Point Configurations

Shin Yong CHEN

●Coining Process Design by the Three-Dimensional Backward Tracing Scheme of the Finite Element Method and Its Experimental Confirmation

Han-Ho CHOI, Young-Soo KIM and Beom-Soo KANG

●Modelling of Folding Patterns in Flat Membranes and Cylinders by Origami

Taketoshi NOJIMA

●Development of Concave Conical Gear Used for Marine Transmissions (1st Report, Principle of Generating Helical Concave Conical Gear)

Hidenori KOMATSUBARA, Ken-ichi MITOME and Tatsuya OHMACHI

●Creative Design of Double Safety Shoes Mechanisms

Hong Yih CHENG

---

---

E-mail:journal@jsme.or.jp

All Rights Reserved, Copyright (C) 2002, The Japan Society of Mechanical Engineers.