JSME International Journal Series B
Contents


Volume 45, No.3 August 2002
Series B: Fluids and Thermal Engineering

 

Contents

Special Issue on International Conference on Power and Energy System

●Foreword
Tshihiko YAMADA

Papers

●Modeling of the Main Component of the Bottoming Stage in an Advanced Co-Generation System on the Operational Planning
Masao TOMIZAWA, Keisuke TAKESHITA, Keisuke TSURI, Yoshiharu AMANO, Masashi AKIBA and Takumi HASHIZUME

●Simulation of CO2 Recovering Closed Gas Turbine with CH4-O2 Firing
Takumi EBARA, Norihiko IKI, Sanyo TAKAHASHI and Jun HAMA

●LDV Measurements of Unsteady Flow within a Turbine Rotor at Low Reynolds Numbers
Takayuki MATSUNUMA, Hiroyuki ABE and Yasukata TSUTSUI

●Flow Film Boiling Heat Transfer in Water and Freon-113
Qiusheng LIU, Masahiro SHIOTSU and Akira SAKURAI

●A Review of Study on Thermal Energy Transport System by Synthesis and Decomposition Reactions of Methanol
Qiusheng LIU, Akira YABE, Shiro KAJIYAMA and Katsuya FUKUDA

●Performance of High Temperature Air Combustion Boiler with Low NOx Emission
Hiromichi KOBAYASHI, Yoshihito ITO, Naoki TSURUTA and Kunio YOSHIKAWA

●R&D on Micro-pyrolyzer for Solid Wastes Using High Temperature Steam and Air
Wei WU and Kunio YOSHIKAWA

●Upgrading and Life Extension Technologies for Existing Steam Turbines
Akira SAKUMA, Toru TAKAHASHI, Toshihiro FUJIWARA and Masataka FUKUDA

●Structures and Stability of Lifted Combustion Zones in Preheated Oxidizer
Jiongming RUAN, Hideaki KOBAYASHI, Takashi NIIOKA, Abudula ABULITI and Fumio IIDA

●Emission Characteristics of NOx and Unburned Carbon in Fly Ash of Sub-bituminous Coal Combustion
Michitaka IKEDA, Yukitoshi KOZAI and Hisao MAKINO

●Performance of Sorbent Particles for Removal of Cadmium in Hot Gas
Ryo YOSHIIE, Shinya GOTO, Makoto NISHIMURA and Hiroshi MORITOMI

●A Study on Gasification Reactivity of Pressurized Two-Stage Entrained Flow Coal Gasifier
Saburo HARA, Jun INUMARU, Masami ASHIZAWA and Kazuyoshi ICHIKAWA

●Study on Extra Heavy Oil Gasification Reaction Process
Kazuhiro KIDOGUCHI, Saburo HARA, Masami ASHIZAWA and Jun INUMARU

●A Systematic Analysis of the Effect of Air Humidification to Gas Turbine Systems
Toru TAKAHASHI, Eiichi KODA and Toshio MIMAKI

●Remote Monitoring Life Management System for Gas Turbines
Jin'ichiro GOTOH, Yasushi HAYASAKA, Shigeo SAKURAI and Hiraku IKEDA

●Long-Term Operating Experience of Mitsubishi Advanced G-Series Gas Turbine
Keizo TSUKAGOSHI, Eiji AKITA, Yasushi FUKUIZUMI and Koji WATANABE

●Development of New Advanced Low Pressure End Blades for High Efficiency Steam Turbine
Eiichiro WATANABE, Hiroharu OHYAMA, Yasutomo KANEKO, Tosihiro MIYAWAKI and Yoshinori TANAKA

●Transient Heat Transfer for Forced Convection Flow of Helium Gas
Qiusheng LIU and Katsuya FUKUDA

●A New Electrode-mesh Tomograph for Advanced Studies on Bubbly Flow Characteristics
Steffen RICHTER and Masanori ARITOMI

●Evaluation Method for Core Thermohydraulics during Natural Circulation in Fast Reactors (Numerical Predictions of Inter-Wrapper Flow)
Hideki KAMIDE, Kazuyoshi NAGASAWA, Nobuyuki KIMURA and Hiroyuki MIYAKOSHI

●Development of Mitsubishi High Thermal Performance Grid (CFD Applicability for Thermal Hydraulic Design)
Kazuo IKEDA and Masaya HOSHI

●Study on Convective Mixing for Thermal Striping Phenomena (Experimental Analyses on Mixing Process in Parallel Triple-Jet and Comparisons between Numerical Methods)
Nobuyuki KIMURA, Motohiko NISHIMURA and Hideki KAMIDE

●Simulation of Two-Phase Flows and Numerical Evaluation of Interfacial Area
Tadashi WATANABE and Kenichi EBIHARA

●Severe Accident Analysis Code SAMPSON Improvement for IMPACT Project
Hiroshi UJITA, Takashi IKEDA and Masanori NAITOH

●Manufacturing and Handling Techniques of the Monolithic Buffer Material for HLW Disposal
Toshihiko AWANO, Takeshi KANNO, Hiroyoshi UEDA and Takahiro KIMOTO

●Development of Volume-Reduction System for Ion Exchange Resin Using Inductively Coupled Plasma
Morio FUJISAWA and Genichi KATAGIRI

●Hybrid Probabilistic and Possibilistic Safety Assessment: Methodology and Application
Kazuyuki KATO, Osamu AMANO, Hiroyoshi UEDA, Takao IKEDA, Hideji YOSHIDA and Hiroyasu TAKASE

Papers

[Cavitation, from Cav 2001]
●On the Collapsing Behavior of Cavitation Bubble Clusters
Akihisa KONNO, Hiroharu KATO, Hajime YAMAGUCHI and Masatsugu MAEDA

●Unstable Cavitation Behavior in a Circular-Cylindrical Orifice Flow
Keiichi SATO and Yasuhiro SAITO

●Observations of Oscillating Cavitation on a Flat Plate Hydrofoil
Kotaro SATO, Masayuki TANADA, Sachie MONDEN and Yoshinobu TSUJIMOTO

●Inner Structure of Cloud Cavity on a Foil Section
Yasutaka KAWANAMI, Hiroharu KATO, Hajime YAMAGUCHI, Masatsugu MAEDA and Shogo NAKASUMI

●Tip Leakage Vortex Cavitation from the Tip Clearance of a Single Hydrofoil
Seiji HIGASHI, Yoshiki YOSHIDA and Yoshinobu TSUJIMOTO

●Flow Measurement in Helical Inducer and Estimate of Fluctuating Blade Force in Cavitation Surge Phenomena
Akinori FURUKAWA, Koichi ISHIZAKA and Satoshi WATANABE

●Numerical Study of the Effect of the Leading Edge Shape on Cavitation Around Inducer Blade Sections
Olivier COUTIER-DELGOSHA, Jean-Luc REBOUD and Regiane FORTES-PATELLA

[Two-Phase Flow]
●Behavior of Vertical Upward Gas-Liquid Two-Phase Flow Past Obstacle in Rectangular Channel (Effect of Blockage Ratio)
Toshihiko SHAKOUCHI, Dongbo TIAN and Toru IDA

[Jet]
●Hydrodynamic Stability of Two-dimensional Jet near the Nozzle Exit
Sok-Hyun JO and Moon-Uhn KIM

[CFD]
●Detailed Flow Field Structure in Rapid Valve Closure
Paul Ndirangu KIONI

[Heat Transfer]
●Critical Heat Flux Prediction of Subcooled Pool Boiling Based on the Microlayer Model
Yao-Hua ZHAO, Takaharu TSURUTA and Takashi MASUOKA

[Combustion]
●Studies of Temperature Elevation Due to the Pre-flame Reaction in a Spark-ignition Engine with CARS Temperature Measurements Using Fuels of Various Octane Numbers
Inyong CHOI, Kwang Min CHUN, Jae Won HAHN and Chul-Woung PARK

●Calculations of Burning Velocity of Turbulent Premixed Flames Using a Flame Surface Density Model
Samir N.D.H. PATEL and Salah S. IBRAHIM


Home Page


E-mail:journal@jsme.or.jp

All Rights Reserved, Copyright (C) 2002, The Japan Society of Mechanical Engineers.