Volume 46, No.3 July 2003

Series A: Solid Mechanics and Material Engineering

 

Contents

Special Issue on Recent Advances in Materials and Processing

●Trend of Current Research on a New Working Style in Welding

Kin-ichi MATSUYAMA

●Crowning Process of P/M Gears for Automotive Transmissions by Finish Rolling Using Screw-Shaped Tool

Teruie TAKEMASU, Tatsuo OZAKI and Ryoichi MATSUNAGA

●Welding of Thin Steel Plates by Hybrid Welding Process Combined TIG Arc with YAG Laser

Taewon KIM, Yasuo SUGA and Takashi KOIKE

●Braze Pressure Welding (BPW)-A New Method for High Quality Pressure Welding

Akio SUZUMURA, Yohei INAGAKI, Toshi-Taka IKESHOJI and Yasuhiro UENO

●Wear Resistance of Microextrusion Dies Coated by Diamond-Like Carbon Films

Naoto OHTAKE, Xudong YANG, Toshihisa KURODA, Yukinori NAKAMURA and Yoshimasa KONDO

●Modelling of Thin Strip Cold Rolling With Friction Variation by A 3-D Finite Element Method

Zhengyi JIANG and Kiet Ahn TIEU

●Finite Element Investigation of Tip Test with an Aluminum Alloy

Yong-Taek IM, Seong-Hoon KANG, Jae-Seung CHEON and Soo-Young KIM

●Characteristic Variations of Chip Morphology and Cutting Forces in Face Milling with Flat-Faced and Grooved Tool Inserts

Ning FANG

●Changes in Flow Velocity and Metal Flow in Direct Extrusion of Aluminum Alloy

Noriatsu HARIYAMA and Shin-ichi MATSUOKA

●Preparation of Ultra Fine-Grained Magnesium Alloy by Mechanical Alloying of AZ31 Chip-Aluminum Powder Mixture

Ayako OHGUCHI, Eiji YUASA and Katsuyoshi KONDOH

●Mechanical Properties of Mg₂Si/Mg Composites via Powder Metallurgy Process

Hiroshi MURAMATSU, Katsuyoshi KONDOH, Eiji YUASA and Tatsuhiko AIZAWA

●Mechanochemical Activation of Solid State Reaction between Mg and TiO₂

Venkataraman SHANKAR, Li LU and Man On LAI

●Utilization of Powder Microstructure to Strengthening of Fe-Cu Alloy From Rapidly Solidified Powder

Hideki KAKISAWA, Kazumi MINAGAWA, Susumu TAKAMORI, Yoshiaki OSAWA and Kohmei HALADA

●Production of Fine Metallic Powders by Hybrid Atomization Process

Kazumi MINAGAWA, Yunzhong LIU, Hideki KAKISAWA and Kohmei HALADA

●Anomalous Surface Deformation of Sapphire Clarified by 3D-FEM Simulation of the Nanoindentation

Roman NOWAK, Timo MANNINEN, Chunliang LI, Kari HEISKANEN, Simo-Pekka HANNULA, Veikko LINDROOS, Tetsuo SOGA and Fusahito YOSHIDA

●The Effects of Ferrite Content and Morphology on the Mechanical Properties and Room Temperature Creep of Quenched and Tempered SAE 4340 Steel

Cheng LIU, Sanjiwan BHOLE and Derek NORTHWOOD

●Relationship between Fracture Modes and Fractality of Fracture Surfaces

Toshifumi KAKIUCHI, Tadashi SHIOYA, Katsuhiko SATOH and Koji FUJIMOTO

●Degradation of Materials by High-Energy Atomic Oxygen

Koji FUJIMOTO, Katsuhiko SATOH, Tadashi SHIOYA, Naoki SEKI and Kazuhide FUJITA

●Tensile Strength of Carbon/Carbon Composites

Hiroshi HATTA, Tatsuji AOI, Itaru KAWAHARA, Yasuo KOGO and Ichiro SHIOTA

●Effect of Understress on Fretting Fatigue Crack Initiation of Press-Fitted Axle

Masanobu KUBOTA, Sotaro NIHO, Chu SAKAE and Yoshiyuki KONDO

●A Study on Stress-Corrosion Cracking Using Single Fiber Model Specimen (Degradation Properties of GFRP Caused by Water Absorption)

Hiroyuki KAWADA and Akira KOBIKI

●Impact Tensile Properties of Friction Welded Butt Joints between 6061 Aluminum Alloy and Type 304 Stainless Steel

Takashi YOKOYAMA

●High Velocity Tensile Test for Thin Plate Specimen with One Bar Method

Masaaki ITABASHI

●Evaluation of Dynamic Stress-Strain Relations of Ti-Alloys and Al-Alloys Based on the Thermally Activated Process Concept

Kinya OGAWA

●Experimental Characterization of Interlaminar Fracture Behavior in Polymer Matrix Composites under Low-Velocity Impact Loading

Takayuki KUSAKA

●An Evaluation of the Adhesive Strength of the Interface between a Coating and Substrate

Yukio MIYASHITA, Yu SASAKI, Tomoaki KUROISHI, Takanori WATANABE, Jin-Quan XU, Yoshiharu MUTOH and Manabu YASUOKA

●Subsurface Crack Propagation in Rolling Contact Fatigue of Sintered Alloy

Yukio MIYASHITA, Yoshihiro YOSHIMURA, Jin-Quan XU, Makoto HORIKOSHI and Yoshiharu MUTOH

●AE Characterization of Fracture Behavior in Bioceramics under Simulated Body Environment

Teppei KAWAKAMI, Satoshi KOBAYASHI and Shuichi WAKAYAMA

●Injection Molding of Polystyrene Matrix Composites Filled with Vapor Grown Carbon Fiber

Kazuki ENOMOTO, Toshiyuki YASUHARA, Naoto OHTAKE and Kazunori KATO

●Mechanical Characterization of CFRP Woven Laminates between Room Temperature and 4K

Susumu KUMAGAI, Yasuhide SHINDO, Katsumi HORIGUCHI and Tomo TAKEDA

●Influence of Flaws of Wire Rod Surface, Inclusions and Voids on Wire Breaks in Superfine Wire Drawing

Kazunari YOSHIDA, Somchai NORASETHASOPON, Tetsuo SHINOHARA and Ryuta IDO

●Possibility of Extrusion of Wood Powders

Tsunehisa MIKI, Norio TAKAKURA, Takashi IIZUKA, Katsuhiko YAMAGUCHI and Kouzou KANAYAMA

●Internal Stress Diagrams of Sintering Stress versus Viscosity for Graded Multilayers

Kazunari SHINAGAWA

●Observation of Joining Phenomena in Friction Stage and Improving Friction Welding Method

Masaaki KIMURA, Kenji SEO, Masahiro KUSAKA and Akiyoshi FUJI

●Autonomous Mobile Robot System for Monitoring and Control of Penetration during Fixed Pipes Welding

Masahiro MURAMATSU, Yasuo SUGA and Kazuhiro MORI

●Cavitation Shotless Peening for Surface Modification of Alloy Tool Steel

Hitoshi SOYAMA, Kei SASAKI, Dan ODHIAMBO and Masumi SAKA

●Interface Fatigue Crack Propagation in Ceramic Thermal Barrier Coatings

Yoshiharu MUTOH, Jin-Quan XU, Yukio MIYASHITA, Gomez G. BERNARDO and Masashi TAKAHASHI

●On Design Technique of Micro-Devices Using Functional Continuum

Mitsuhiko TAKA, Juhachi ODA and Masahiro TOMISAKA

●Cracking Behavior of Fused Silica Glass in Sphere Indentation

Hatsuhiko USAMI, Kazuto OHASHI, Shinnya SASAKI and Junji SUGISHITA

●Twist Resulting in High Strength Steel Sheet Hat Channel Product Consisting of Straight Portion Combined with Curved Portion

Takahiro IYAMA, Takashi HOSHI, Kentaro ODANAKA, Yoshio FUJISHIRO, Motoo ASAKAWA and Ikuhiko HAYASHI

●Thermoforming of Textile Composite Pipe Fittings

Jun-ichi OZAKI and Ken-ichi MANABE

●Die-Life Analyzer Employing Independent Instance Databases of Cold Forging Die Life on the Internet

Takahiro OHASHI

●Time and Temperature Dependence on Flexural Strength of Heat-resistant CFRP Laminates

Yozo HAMAGAMI, Naoyuki SEKINE, Masayuki NAKADA and Yasushi MIYANO

●Factors Affecting on Mechanical Properties of Soft Martensitic Stainless Steel Castings

Yoshitaka IWABUCHI

●Development of Metallic Closed Cellular Material Containing Organic Materials and Its Mechanical Properties

Satoshi KISHIMOTO, Zhenlun SONG and Norio SHINYA

●Friction Welding Characteristics of Al-Mg Aluminum Alloy (A5056) and Carbon Steel (S45C)

Akiyoshi KOBAYASHI, Michihide MACHIDA, Shigeo HUKAYA and Masatoshi SUZUKI

●Laser Fabrication of Affective 3D Objects with 1/f　Fluctuation

Katsuhiro MAEKAWA, Tomohiro NISHII, Terutake HAYASHI, Hideo AKABANE and Masahiro AGU

●Applicability of Time-Temperature-Water Absorption Superposition Principle for Flexural Strength of CFRP Laminates

Hisanori FUJIEDA, Naoyuki SEKINE, Masayuki NAKADA, Yasushi MIYANO, Akira KURAISHI and Stephen W. TSAI

●Fabrication of Nickel Based Active Composites

Hiroshi ASANUMA, Genji HAKODA and Takeshi MOCHIZUKI

●Fabrication of CFRP/Al Active Laminates

Hiroshi ASANUMA, Osamu HAGA, Junichiro OHIRA, Kyosuke TAKEMOTO and Masataka IMORI

●Prediction of Fatigue Life for CFRP/Metal Bolted Joint under Temperature Conditions

Naoyuki SEKINE, Masayuki NAKADA, Yasushi MIYANO, Akira KURAISHI and Stephen W. TSAI

●Fractal Dimension of Ductile-Fractured Surface of Copper-Brazed Steel Calculated from Its Dimple Size Distribution

Toshi-Taka IKESHOJI and Akio SUZUMURA

●Planarization of a Layer Made by Using Electrical Discharge Machining

Masao AKIYOSHI, Akihiro GOTO, Naotake MOHRI and Nagao SAITO

●Theory of Non-destructive Inspection of Ceramics Damaged Through Machining Process

Yohtaro MATSUO and Kouichi YASUDA

●The Application of the Brazing Process in Selective Laser Sintering Fabricated Parts

Loy Seng LIEW, Katsuhiro MAEKAWA, Shinichi IIDA and Tomoya SUZUKI

---

---

E-mail:journal@jsme.or.jp

All Rights Reserved, Copyright (C) 2003, The Japan Society of Mechanical Engineers.