Vol. 40, No. 4　December 1997 Series C：Dynamics,Control,Robotics,Design and Manufacturing

［Special Section on Magnetic Bearings］

●State of the Art of Magnetic Bearings ―Overview of Magnetic Bearing Research and Applications―

Fumio MATSUMURA, Yohji OKADA, Masayuki FUJITA and Toru NAMERIKAWA

●Experimental Verification on Gain Scheduled H■∞ Robust Control of a Magnetic Bearing（97-4019）

Toru NAMERIKAWA, Masayuki FUJITA and Fumio MATSUMURA

●Super-Hybrid Magnetic Suspensions for Interferometric Scanners（96-5059）

Donald R. NOHAVEC, Lawrence S. SCHWARTZ and David L. TRUMPER

●Multivariable Identification of Active Magnetic Bearing Systems（96-5062）

Conrad GA■HLER, Manuel MOHLER and Raoul HERZOG

●Principle and Application of a Bearingless Slice Motor（96-5052）

Reto SCHOEB and Natale BARLETTA

●Robust Adaptive Control of Unbalance Response for a Flexible Rotor（96-5057）

Carl R. KNOSPE and Samir M. TAMER

［Vibration and Acoustics］

●Sound Field Assessment by Measurement of Sound Pressure Distribution Close to Machine Noise Source（Estimation of Normal Particle Velocity at an Aperture by Single- Plane Sound Pressure Measurement）（96-0101）

Haruo HOUJOH, Shun-ichi OHSHIMA and Kiyohiko UMEZAWA

●Study of Sound Isolation Panel with Ventilation Holes（Principle and Transmission Loss）（96-1242）

Keijiro IWAO, Yasuyuki ASAHARA, Ichiro YAMAZAKI and Haruki YASHIRO

●ETS-VI On-Orbit System Identification Experiments（96-0357, 0358）

Isao YAMAGUCHI, Takashi KIDA, Keiji KOMATSU, Masaaki SANO, Takeshi SEKIGUCHI, Shin-ichi ISHIKAWA, Shin-ichiro ICHIKAWA, Katsuhiko YAMADA, Yuichi CHIDA and Shuichi ADACHI

●New Deconvolution Method for a Time Series Using the Discrete Wavelet Transform（96-0153）

Arata MASUDA, Sizuo YAMAMOTO and Akira SONE

●Two-Dimensional Deformation Analysis of Human Left Ventricle during Ejection Period Using Magnetic Resonance Tagging Technique（96-1076）

Tadashi INABA, Masataka TOKUDA, Yasutomi KINOSADA, Yutaka SAWAKI and Kazuo YAGI

●Design Optimization of Passive Gyroscopic Damper（Stability Degree Maximization）（95-2027）

Osamu NISHIHARA and Hiroshi MATSUHISA

●Beam Model for Seismic Analysis of Complex Shear Wall Structure based on the Strain Energy Equivalence（96-4063）

G.R. REDDY, Kohei SUZUKI and S.C. MAHAJAN

●Laser Doppler Measurement of Local Flow Field in Collapsible Tube during Self-Excited Oscillation（96-1109）

Kenkichi OHBA, Atsushi SAKURAI and Junji OKA

●Running Test on Current Collector with Contact Force Controller for High-Speed Railways（96-4064）

Toshiaki MAKINO, Kazuo YOSHIDA, Shinji SETO and Kazuhiro MAKINO

●Robust Vibration Control of a Cantilever Beam Using Self-Sensing Actuator（96-0730）

Kazuhiko OSHIMA, Tadao TAKIGAMI and Yoshikazu HAYAKAWA

●Robust Control of Magnetic Bearing Systems Using ■-Synthesis with Descriptor Form（96-0786）

Kenzo NONAMI, Noriyuki IDE and Hirochika UEYAMA

●Omnidirectional Walking Mechanism（Redundancy and Trajectory Control）（95-2004）

Toshio FUKUDA, Yuji ADACHI, Haruo HOSHINO, Eiji MURO and Kentarou KURASHIGE

●Adaptive Fuzzy Logic Control of a Single-Link Flexible Arm（92-3026）

Jiunn-Horng CHEN, Ming-Shaung JU and Yeong-Ging TSUEI

●Asymptotic Stability Analysis for Collocated Direct Output Feedback Control of Flexible Systems（96-5043）

Heng-Kwung LEE, Song-Tsuen CHEN and An-Chen LEE

●Application of Sliding Mode Control with a Low Pass Filter to the Constantly Rotating Slider-Crank Mechanisms（97-5020）

Rong-Fong FUNG, Faa-Jeng LIN, Jeng-Sheng HUANG and Yun-Chen WANG

●Continuous Sliding Mode Control for Systems Subjected to Nonlinear Multiple Time-Varying Delayed Perturbations（97-5021）

Jun-Juh YAN, Jason Sheng-Hong TSAI and Fan-Chu KUNG

●Sensory Evaluation of Grip Using Cylindrical Objects（96-0155）

Takao YAKOU, Keijiro YAMAMOTO, Masahiro KOYAMA and Kazuhito HYODO

●A Thermal-Expansion-Type Microactuator with Paraffin as the Expansive Material（Basic Performance of a Prototype Linear Actuator）（96-0699）

Nobuyuki KABEI, Masayuki KOSUDA, Hideki KAGAMIBUCHI, Ryoichi TASHIRO, Hitoshi MIZUNO, Yasuhiro UEDA and Kiichi TSUCHIYA

●Prediction of Rotordynamic Forces in a Labyrinth Seal based on Three-Dimensional Turbulent Flow Computation（95-1884）

Eiji ISHII, Chisachi KATO, Katsuaki KIKUCHI and Yoshiharu UEYAMA

●A Computer Based Approach for Evaluation of Operating Performances of Bevel and Hypoid Gears（95-1547,1548）

Aizoh KUBO, Ichiro TARUTANI, Claude GOSSELIN, Tetsuya NONAKA, Noboru AOYAMA and Zhonghou WANG

●Joining Characteristics of a Tapered Coupling Joint（95-1903）

Etsuo MARUI, Hiroki ENDO, Masatoshi HASHIMOTO, Shinobu KATO and Atsuo TSUJI

●Method for Cutting Hypoid Gears（Duplex Spread-Blade Method）（96-0594）

Kazumasa KAWASAKI and Hisashi TAMURA

●Lubricating Ability of Langmuir-Blodgett Films as Boundary Lubricating Films on Articular Surfaces（96-0412）

Hidehiko HIGAKI, Teruo MURAKAMI and Yoshitaka NAKANISHI

●Simulation of Trabecular Surface Remodeling based on Local Stress Nonuniformity（96-0907）

Taiji ADACHI, Yoshihiro TOMITA, Hiroshi SAKAUE and Masao TANAKA

●Computer-Aided Operation Planning System for Automatic Machining of Injection Mold Die（96-5013）

Joon-Seong LEE and Myon-Woong PARK

---