Vol. 41, No. 3August 1998 Series B：Fluids and Thermal Engineering

Papers

［Internal Flows］

●Slip of Newtonian Fluids at Slid Boundary(525)

Keizo WATANABE, YANUAR and Hiroshi MIZUNUMA

●Stability Analysis of Supersonic Cascade Flow by Actuator Disk Methods(530)

Yukiharu IWAMOTO, Kazuhiko YOKOTA and Yoshinobu TSUJIMOTO

●A Study on the Swirling Flow Field in the Freeboard of a Vortexing Fluidized Bed Combustor(538)

Chun-Hung LIN, Jyh-Tong TENG, Chien-Song CHYANG and Cheng-Hsing HSU

●An Experimental Study on the Development of a Reverse Flow Zone in a Vaneless Diffuser(546)

You Hwan SHIN, Kwang Ho KIM and Byung Jin SON

［Drag Reduction］

●Drag Reduction for a Rotating Disk with Highly Water-Repellent Wall(556)

Keizo WATANABE and Satoshi OGATA

［Multiphase Flows］

●Flow Characteristics of Gas-Liquid Two-Phase Annualar Flow under Microgravity (Experimental Results Utilizing a Drop Tower)(561)

Terushige FUJII, Takeshi NAKAZAWA, Hitoshi ASANO, Hiroyuki YAMADA and Takashi YOSHIYAMA

●Numerical Analysis of Detailed Flow Structures of a Bubble Plume(568)

Yuichi MURAI and Yoichiro MATSUMOTO

●Fluid Force and Flutter Stability of a Pitching Hydrofoil in Subcavitation Region(575)

Yasuaki MATSUDAIRA and Naoto OKAZAKI

●Dispersive Waves in a Coupled System of Magnetic Fluid and Elastic Membrane(583)

Koichi TANAKA, Yasushi IDO and Kunitoshi TAKUMA

［Flows in Porous Media］

●An Experimental Study of Dynamic Solid-Liquid Phase Equilibrium in a Porous Medium(590)

Yoshiaki MIYATA and Satoshi AKAGAWA

●A Thermodynamic Study of Liquid Transportation in Freezing Porous Media(601)

Yoshiaki MIYATA

［Flow Oscillation and Flow Induced Pressure］

●Mechanism of Jet-Flutter: Self-Induced Oscillation of an Upward Plane Jet Impinging of a Free Surface(610)

Haruki MADARAME and Masao IIDA

●Acoustic Field around an Exit of Flanged Cylindrical Duct with a Coaxial Cavity(618)

Koichi TANAKA, Yasuji TSUBAKISHITA and Koichi HAYASHI

●Numerical Analysis of Pressure Variation under Train Passage Using the Boundary Element Method(624)

Katsuhiro KIKUCHI, Nobuaki YAMAUCHI, Koji NAKATANI, Tatsuo MAEDA and Mitsunori YANAGIZAWA

［Heat Transfer and Reacting Flows］

●Analytical Method for Stirling Engines and Coolers(632)

Noboru KAGAWA

●Fundamental Study of Latent Cold Heat Energy Storage by Means of Oil Droplets at Low Freezing Point (Numerical Calculation of Motion and Solidification Characteristics of Oil Droplets Ascending in a Cold Water Solution due to Buoyancy)(641)

Hideo INABA and Kenji SATO

●An Evaluation of Premixed Combustion around a Bluff Body Using a Combustion Model(650)

Shin-ichi INAGE, Vincent PEREZ and Nariyoshi KOBAYASHI

●RNG Modeling of Turbulent Heat Flux and Its Application to Wall Shear Flows(657)

Yoshihiro ITAZU and Yasutaka NAGANO

●A Model of Turbulent Burning Velocity Taking the Preferential Diffusion Effect into Consideration(666)

Hiroyuki KIDO and Masaya NAKAHARA

●Effects of Wall Catalysis on the Reacting Zone Structure of a Supersonic Flow Chemical Oxygen-Iodine Laser(674)

Wataru MASUDA, Manabu HISHIDA and Naoki AZAMI

●Foreword(683)

Papers

●Research and Development of a New Coal Based Combined Cycle Power Plant Concept(685)

Eiichi HARADA, Masaki UEKADO, Syouichi TAKAO, Tadashi TANAKA and Masamitsu SUDA

●Cooling Technology for MCFC Stack(691)

Mitsuie MATSUMURA, Toshio SHINOKI and Tetsuya YAGI

●Analysis of Transitional Change in Pressure after Quench in Superconducting Generator(697)

Takashi INAGUCHI, Hideto YOSHIMURA, Toshiki HIRAO, Kazuichi SUZUKI, Akinori UEDA and Katsuyoshi TOYODA

●Experimental Study of Fluid Motion in Air Gap Using Scaled Water Model (Winding Efficiency of Rotor Surface Shape of Air-Cooled Generators)(703)

Toshiyuki UMEMOTO, Takeharu OSHIMA, Kunihiko KAGA and Satoru KOTOH

●Application of an In-Furnace NOx Removal (MACT) System for Recovery Boilers(709)

Toshiki MOTAI, Yoshihisa ARAKAWA, Hirokazu HINO and Yoshitaka BABA

●Development of High Efficiency Refuse Fired Boiler Applied in Circulating Fluidized Bed Combustion(714)

Shozo KANEKO, Yoshihisa ARAKAWA, Hiromu TAKATSUKA and Akira HASHIMOTO

●Flow Pattern and Heat Transfer in Tube Banks of a Simulated Fluidized-Bed Heat Exchanger(720)

Mamoru OZAWA, Hisashi UMEKAWA, Takeshi MATSUDA, Nobuyuki TAKENAKA and Masahito　　　MATSUBAYASHI

●Resonance Characteristics of Turbine Blades with Compound Periodic Structure(727)

Eiji SAITO, Kiyoshi NAMURA and Akira OKABE

●Design of 600°C Class 1 000 MW Steam Turbine(734)

Ichiro OBARA, Yoshinori TANAKA, Ryotaro MAGOSHI, Hiroshi YOKOTA, Takashi SHIGE and Katsuhiko TAKITA

●The Initiation of Corrosion Fatigue Cracking from Pitting in 3. 5Ni-Cr-Mo-V Low-Pressure Rotor Steel(740)

Liang YAN, Shuichi INAGAKI, Hirotugu KODAMA and Kazushige KIMURA

●Development of Gland Packing Using Graphite Pellets(746)

Kenji MIKATA and Shunichi KIYOSAWA

●New Tube Arrangement of Condenser for Power Stations(752)

Kenji SATO, Akihiro TANIGUCHI, Takafumi KAMADA, Ryoji YOSHIMURA and Yoshio MOCHIDA

●Development of Fly Ash Quality Control System(759)

Kouzou BAN

●Study on Growth Behavior and Heat Transfer of Ash Deposit(765)

Hiroyuki CHIKUMA, Masaaki KURIMURA, Kazuyoshi ICHIKAWA, Takeshi TAKAHASHI and Saburo HARA

●Creep Damage Evaluation by Intra-Granular Distortion Analysis(769)

Hiroki YOSHIZAWA, Masashi NAKASHIRO, Shigemitsu KIHARA and Hideo UMAKI